How To Repair Washing Machine Belt? – A Step By Step Guide
The name of the drive belt also knows a washing machine belt. It is taken to be one of the most critical parts of any washing machine.
It functions as it drives the motion of the unit where the clothes are washed and spun.
If your washing machine is making too much of the noise and sound, then there might be an issue as to where the belt is probably worn or displaced.
Also, check our article on cleaning washing machine with bleach.
Table of Contents
A Complete Guide To Repair Washing Machine Belt
If your machine has been all filled with the water but is not moving, then it is for sure that the belt has been completely broken away. So the last way to get rid of the broken belt would be repairing it first hand.
- You can start all the way by washing machine from the electrical outlet or power source. You have to perform this step just as before attempting to replace the washing machine drive belt.
- Now you should check to see if your washing machine has an access panel. If it is having one, then it will be located as on one of the sides for sure at the back. You have to make it all removed for washing machine belt replacement. If not then you will be going to look through the bottom of your machine for the drive belt.
- Now in the next step, you will be going to remove the access panel of your washing machine once you locate it. You do have to make sure your model has a drive belt.
- Now in the next step, you have to cover the floor where your washing machine located. You have to do this as once you determined that your model has a drive belt. It will be on the whole protecting the area from water that will leak from the side of the washing machine.
- You do have to gently turn the washing machine straight on its side once you determine that your model runs using the drive belt.
- In the next step you the method you do have to locate the washing machine belt. It will be black.
- Now you have to remove off the clamps that connect rubber coupling as well as the belt and washing machine motor.
- You do have to slide the old washing machine drive belt off the transmission as well as motor pulleys.
- You should replace the new washing machine drive belt by way of slipping it over the transmission and motor pulleys from which you removed the old belt.
- Now be careful as you have to connect the rubber coupling and the clamps over the new washing machine belt.
- You do have to turn your washing machine back to the upright position.
- Now unplug the machine back into the power outlet. You can even give it a try to make sure it now runs correctly.
Method No 2: How to repair Washing Machine Belt
We will make you teach with another easy way by which you can figure out how to fix the washing machine belt.
You can start with the drive belt. If you want to avoid the risk of electric shock, you have to unplug the washing machine. Just lay the washing machine on its back.
You will be using a 5/16" as well as a socket wrench. It would be needed to remove both screws from the belt cover. You will remove off the belt cover from the washer.
In the next, you have to make the use of the 1/2" socket and remove the bolt securing the drive pulley.
As you are installing with the green new belt, you have to wrap the strap around the region of both the motor and drive pulleys. It is to do as before reinstalling the drive pulley.
Also, check our article on repairing semi-automatic washing machine dryers.