How to Repair Washing Machine Agitator? – A Step By Step Guide
Here we have shared an amazing guide on how to repair washing machine agitator.
So, let’s get started…
A washer agitator normally functions as by moving the water and clothing around in the machine. It is all carried out by keeping space between the fabrics so the soap can penetrate.
If your machine is not giving your clothes as much cleaning as possible, then you need to consider whether the agitator is at fault.
Also, check our article on cleaning washing machine seal.
Table of Contents
A Complete Guide to Repair Washing Machine Agitator
You should be carrying out as repairing your agitator that can be a complicated process.
To make your task easy much, here we are sharing the complete guidelines that can make you learn how you can repair the washing machine agitator easily!
Step #1:
The very first as in fixing your agitator is to take the item out of the washing machine. This is not an easy step as you do imagine as the agitator is placed in there pretty firmly.
You should try filling the washing machine half-full, and then you can put a string rope around the neck of the agitator.
You should be using a piece of wood or lumber, and gently raise it up in a lever fashion. You can even think about to inspect the insides of the agitator.
Step #2:
In the next step of the method, you have to open this piece so that you can see inside. There has to be the placement of the screw on the base of the agitator which can be removed by means of using a screwdriver.
You will also encounter the installation of the large bolt at the other side which can be loosened by using the wrench. You have to take these parts off, and the agitator should split in half.
Step #3:
Now its time to inspect and fix up with the problems. You will be carrying out the close inspection of the mechanics inside.
There may be the placement of the loose wire somewhere within the system. It might be possible that you do find the screw part of the agitator has been broken.
ou have to check the paddles as well to make sure that they are not cracked or broken. As you already have the agitator out of the washing machine, you should also check the central pole on top of which it sits in order to make sure that it is completely clean.
In the timeline condition of the loose wires, you just need to reconnect them and make sure that the new connections are firm.
A dirty central pole has to be instantly scrubbed clean with a scrub brush and a mild detergent.
Step #4:
Now its time to reinstall with the agitator! You have to slide the agitator back into place and replace the screws and so as the bolt so it is secure.
You should take the string and lower it down into the range of the central pole. Your agitator should settle right into the bottom.
What are Agitator Directional Cogs?
On top loading washers they do consider making the use of the dual action agitator. It is possible such that the upper portion of the agitator to become disengaged from the bottom portion.
The upper portion is all driven by the side of the directional cogs. They are manufactured with hard plastic and can wear out from hard use.
If in the condition the upper portion of your agitator will turn in either direction or makes a grating sound, then you have to get them all replaced.
You should be removed from the softener dispenser cover to access the retaining bolt securing the top portion of the agitator.
To repair the agitator of the washing machine, do not miss out following the method which we discussed right here for you!
Also, check our article on repairing washing machine PCB.
