How to Connect Portable Washing Machine To The Faucet? – A Step By Step Guide

Step #1:

In step one, you will be carrying out the extension of the hoses. It is to be mentioned that none of the hoses that are coming with the washer are long enough to reach the sink.

The supply hose is mentioned to be the female hose fitting as both the ends.

You need to cobble them all one together out of plastic hose repair fittings and clear braided tubing too. Hence the extension of the drain hose is about 1-1/4″ ID braided tubing.

It is all known out to be the friction fit as around the outside of the drain hose. You can secure it all by using the hose clamp.

This works fine by means of the corrugated drain hose as it would be best to work with a smoothly surfaced hose.

It is important to take into notice the dimension and measurement of the hose while buying it because it is important equipment of the portable washing machine connection.

Step #2:

Next step is all about the connection of the sink. You do need the equipment of the sink aerator thread to hose connection adapter. You can also get in the rack of small plumbing fittings.

The adapters get connected to the faucet. In the same way, the hose gets connected to the adaptor. The knee bone is all the more connected to the shin bone.

Step #3:

In the third step of the method, you will be carrying out the connection of the washing machine. Hence the supply hose does need to be all the more connected to the cold hose connection.

You are going to undergo the controlling water temperature with the faucet controls. You do need to rinse cycle that is usually cold and then you need to hook up to this side to make it work at the best.  

The solenoid form of the valved have enough sets of the slop into them for the sake there is some leakage out of this connection.

Step #4:

It’s time to finish the whole setup! You will be noticing around that the velcro ties holding the hose together. This to keep the drain hose from flopping out of the sink mid-cycle.

You have to make sure that all the connections are right and are turning on the water to the temperature you want it. You have to fire it up and do your laundry task.  If you are in the want of the cold rinse, then you will be having some change in the faucet settings mid-cycle.

Step #5:

As you do disassemble the particular hoses, then you have to be sure that you have a bucket around to drain them out. You need to be much careful with this step because it requires much attention in terms of securing.

Step #6:

In the last in the wrapping up make the use of the velcro ties is to keep the hoses in place. Do it at the time when the machine is not in use. 

Otherwise, the attachment of the electricity to the washing machine can damage the whole equipment.

This was all about the end of the method that can make you learn how easily you can connect the portable washing machine to the faucet.

This method is much simple and steps are straightforward too.