How To Clean Washing Machine Tub With Vinegar? – A Step By Step Guide
For some of the people cleaning the washing machine does not make any sense at all.
They do think that when you are washing the clothes, then eventually the spinning of the cycle with water will clean away the washing machine residue from dirt and dust.
But cleaning the washing machine is essential much to make it resist for a long time.
Also, check our article on repairing washing machine drain motor.
A Complete Guide To Clean Washing Machine Tub With Vinegar
You can do the successful cleaning of the top loading or front loading machine with white vinegar. But they are always in need of using different kinds of vinegar and do even require a slightly different process. Let’s make you teach how it is possible!
As in favor of cleaning your top loading washing machine in simple terms, then you do need to have the ingredients of the white vinegar and some cleaning cloths.
- Starting with, it is essential that you should be setting the washer to its hottest temperature just over at the highest capacity and so as the most extended cycle.
- Then you will be adding on with the four cups of white vinegar to the hot water. Now tightly close the lid and let it agitate for a few of the minutes.
- Now you have to open the lid so that the machine stops. It would let you sit as for one whole hour as in this way the vinegar can do its job to get rid of the bacteria hiding in the range of all those nooks and crannies and so as the hoses of your machine.
- Now as you have entirely run away with the cycle in the vinegar solution, you can stop at that moment and then repeat the process if your washing machine is extra dirty. The vinegar is perfect when it comes to the removal of the mineral buildup. It would also be removing off with the minor softening any soap scum and another residue that would be happening to take place in the building up within the washer and hoses. You should allow the machine to agitate the solution for a few minutes and then open the lid.
- As you do let the solution to sit around for one hour, now you have to deal with the exterior of the washer as well as the fabric softener and so as the bleach reservoirs. You will be using a cleaning rag or microfiber cloth and then make it dip it in the vinegar solution. You will be using the answer as to wipe away with the exterior as well as a lid and so as the control panel. You need to be careful at the time of removal of the bleach reservoir and wipe down in the region of this area as where the scum and dirt will be tending on to collect it. You have to rinse off the cloth and then remove off with the softener reservoir from the agitator and wipe the exterior and interior of it as well.
- You can get on with the plan to first select the hot water setting. If your machine does not have much of the warm water setting, then you can think about to undergo the selection of”white” or a “stain” cycle setting.
- You have to select the “extra rinse” option if in case your washer has that choice.
- Now you have to add on with the ¾ cup of white vinegar to the bleach dispenser or fill to its max level.
- Just let the cycle to run until it not finished.
- If you want to make sure that no amount of vinegar left in the washer, then you can select one with the additional rinse cycle if your machine does not have a 2nd rinse cycle selection.
- As you are all done with the washing of the tub, its time when you have to clean the bleach and fabric softener dispensers. You can do this quickly with the warm water or the soapy water to remove any residue. Allow them to get dry thoroughly before reinserting them.
- As you are all done with the cleaning of the three zones, you have to wipe down the exterior later on and so as the control panel using the general all-purpose cleaning spray. It will be helpful to remove off with any dust and dirt buildup.
If you want to clean the washing machine tub with vinegar, then follow up with these two method tutorials right now.
Also, check our article on cleaning washing machine seal.