How To Clean Washing Machine Drum? – A Step By Step Guide
Do you sometimes fail to clean and maintain your washing machine that can lead to bad odors, germs, bacteria, and mold?
Well, for some of the people cleaning the washing machine is one of the hard tasks to do because it does contain so many of the equipment in it that do needs some care and attention.
Also, check our article on using mini portable washing machine.
Table of Contents
A Complete Guide To Clean Washing Machine Drum
The washing machine most important tool is the drum that is so horrifying looking as it is all covered in black mold and built up soap scum. In this blog post, we will discuss upon with some of the important details of the cleaning of washing machine drum!
What are the Main Reasons for the Washing Machine to Get so Dirty?
The reason for getting the washing machine so dirty is that the gasket of your front loading machine hence traps a lot of water in it. It is the end promotes the growth of mold.
You have to wipe the gasket dry after each wash.
At the same time the mold grows in damp places, so make sure you do leave the washing machine door open at all times to help it to dry out. You should not leave your wet washing in there.
Most of the times washing at a low temperature is a problem when it comes to the germs and bacteria that build up in your machine.
You should do at least one was a month at a minimum of 60ºC (140ºF) as preferably 90ºC (194ºF) to sanitize up your device.
Hence the overuse of detergent can cause build up, so you need to be careful at the time to measure out your dose according to your load size and how soiled it is.
In favor of the HE machines, you do need to reduce excess suds by using a specialized HE detergent.
You should be using the liquid detergents and fabric softener that can cause a sticky, waxy build up on the inside of your washing machines drum.
Methods to Clean the Washing Machine Drum
- You have to first of all pack the rubber folds and cavities of the gasket using the paper towels soaked in hydrogen peroxide. You can leave it to absorb as for the few hours before wiping down clean and dry. You also need to make the use of the soft brush to scrub it gently.
- In the next step, you have to prevent it from getting moldy by using an old towel or paper towel to dry around the rubber gasket or the door seal after each wash. You could also keep on add with some vinegar or hydrogen peroxide to the sheet as you do wipe it down to scare away the mold. It is to mention that the water that trapped inside the washing machines gasket which encourages mold to grow.
- You can also make the use of the paper towel soaked in hydrogen peroxide or white vinegar to wipe around the opening of the machine. You need to try to get between the tub rim and top edges.
- Now remove off the dispensers from the machine. You do need to fill your tub up with hot water and half a cup of vinegar and scrub away. You do need to clean the area where the dispenser sits as this can become moldy too. If the machine is not able to get it all removed, then you can make the use of the pipe cleaner or an old toothbrush to get into the crevices.
Step No #1:
For this purpose, you do need to choose with the powdered enzyme detergents over wet ones.
You do need to select the soap that contains a range of grease eating enzymes mentioning with the Amylase, Protease as well as Lipase or Mannanase.
On a regular basis, it is essential to add powdered oxygen bleach to your usual detergent. Be careful as the enzyme detergents are not safe to use on wool or silk.
Step No #2:
Now in the next step, you do need to powder the enzyme detergent and oxygen bleach. You can use dose as directed on the label for large loads.
Step No #3:
Now just set the water temperature to 90ºC (194ºF). You have to dd the detergent and oxygen bleach to the detergent dispenser and begin the wash cycle.
Conclusion – Wrapping It Up
It was the complete set of instructions that would make you learn how you can quickly get on with the cleaning of washing machine drum.
Both methods are quite simple and easy to perform. But in the startup try to make sure you have the helping hand of the professional.
Before going also check our article on cleaning washing machine filters.