How To Clean Front Loading Washing Machine? – A Step By Step Guide
Especially for the beginners, somehow the process of washing the front loading washing machine is such a tricky task to do.
Also, check our article on cleaning washing machine filters.
A Complete Guide To Clean Front Loading Washing Machine
But as you would read out the blog post, you would be finding it much easy to carry out with. Here we will jumble up with the steps for cleaning front loading washing machine for sure!
Step No #1:
In the very first step of the method, you will start by washing the cycle with the use of vinegar.
You do need to make sure that the drum of your washer is empty and then select the “clean cycle” or “tub clean” setting on your machine.
If in case your device doesn’t have a cleaning cycle then you can think about to select the hottest and most massive load settings.
Step No #2:
You have to add on with the 2 cups of vinegar to the detergent tray that would assist you as to rid of odor-causing deposits and mildew.
Step No #3:
Now you would let the washing machine to run through a complete wash and rinse cycle.
Step No #4:
In the second step, you have to clean away the washing cycle by using the bleach.
For this purpose, you have to fill the washer a second time with hot water and also on the “clean cycle” setting too.
Step No #5:
Now you will be adding on with the 2 cups of bleach to the detergent as to remove stains and germs that may be lurking in the wash tub.
Now once again you have to allow the machine to run through a complete wash and rinse cycle.
Step No #6:
As all the stains removed, you do need to run an additional cycle without adding anything to the water. It will thoroughly hence rinse away any remaining residue.
Step No #7:
Now you have to remove off with the bleach dispenser as well as fabric softener dispenser, and any other removable parts from your washer’s detergent tray.
Step No #8:
You have to fill up with the bucket with warm water and a few drops of dish soap. Now drop the detergent tray pieces into the bucket and let them soak for a few minutes.
Step No #9:
As they do get soak you have to pick the pieces out of the bucket and clean them thoroughly with a sponge or cleaning rag.
Now let the parts to get dry and return them to their original position in your detergent tray.
Step No #10:
In the next, you have to pull back the rubber seal at around the washer door to inspect it for the support of the deposits, mildew, and other yucky stuff.
Step No #11:
If you want to make it get clean completely, then you are required to mix 1 cup of liquid chlorine bleach and 1 gallon of warm water in a bucket.
You do need to moisten a clean cloth with the bleach water solution and at the end use the damp cloth to wipe down the seal.
Step No #12:
Just as after wiping the seal down with the bleach water cloth. You do need to follow with a clean, and hence the dry cloth to help remove any remaining moisture from the seal area.
Step No #13:
In the end, you will use a damp cloth or an all-purpose cleaner to wipe down the outside of your machine regarding getting it into the looking as clean outside as it is on the inside.
Conclusion – Wrapping It Up
Well, all through by following these steps you would be able to get your front loading washing machine all clean.
It is one such kind of the process you should regularly be done as at least once per month. For the support of the monthly cleaning, you need to make sure that you take the clothes out of the washer as soon as you can before startup.
You do need to leave away the washer door ajar to let the door and drum dry between uses and the wipe down the rubber seal and drum with a cloth or paper towel.
Before going also check our article on draining portable washing machine.